Panduan Bosch GSR 12V-EC Drill-Driver

Panduan

4 | English

1 609 92A 35H | (14.6.16) Bosch Power Tools

pack may create a risk of fire when used with another bat-

tery pack.

 Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

 When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screw-

drivers

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

 Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age.

 Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

 Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

 Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

Additional Safety and Working In-

structions

 Dust from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dust can

easily ignite.

 The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

 Read the operating instructions of the battery charger.

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

 Adjust the gear switch only when the machine is at a

complete stop.

 Always push the gear selector through to the stop. Oth-

erwise, the machine can become damaged.

 If the gear switch cannot be moved, turn the chuck

slightly. (GSR 12 V-EC)

 The battery charge-control indicator consists of three

green LEDs, and indicates the charge condition of the bat-

tery for a few seconds when the On/Off switch is pressed

halfway or fully.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

LED Capacity

Continuous lighting 3 x green

≥ 2/3

Continuous lighting 2 x green

≥1/3

Continuous lighting 1 x green

< 1/3

Flashing light 1 x green

Reserve

OBJ_BUCH-2595-002.book Page 4 Tuesday, June 14, 2016 2:37 PM

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Bosch GSR 12V-EC Drill-Driver Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Bosch. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Bosch GSR 12V-EC Drill-Driver Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Bosch Drill-Driver
Lebih banyak panduan untuk Drill-Driver

Pertanyaan umum tentang Bosch GSR 12V-EC Drill-Driver

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Bosch GSB 12V-30 Drill-Driver

Panduan

Bosch GSB 120-LI Drill-Driver

Panduan

Bosch GSR 14.4V-LI Drill-Driver

Panduan

Bosch GSR 7.2-2 Drill-Driver

Panduan

Bosch GSB 18V-LI Drill-Driver

Panduan

Bosch GSB 14.4V-LI Drill-Driver

Panduan

Bosch GSR 18V-60 FC Drill-Driver

Panduan

Bosch GSR 14.4VE-EC Drill-Driver

Kategori terkait