Panduan Lucide 22954/01/31 Tube Lampu

Panduan

Safety Instructions

Please read this notice carefully and keep it all along the use of this product. Follow the instructions for a safe and correct

installation and functioning of the fitting. The manufacturer does not accept any responsibility for damage caused by improper

installation and service. Installation should always be done by qualified electrician.

Always isolate the power before commencing installation, maintenance or repair.

In case of doubts, please contact a qualified electrician.

Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation,

please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or

inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.

During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is

damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or another qualified electrician. This is to avoid

all risks.

Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the

correct bulb (respect type and maximal wattage as indicated on the product).

Installation of items in bathroom:

Since each country has its own regulations, please check

them with qualified people, before installing lighting products

in the bathroom.

Below we will explain general requirements.

Zone 0: At least IPX7, and a voltage level according to SELV

is allowed in this zone. SELV means “security extra low

voltage”. In general, this means maximum 12V. We

recommend that the lights are installed by a qualified

electrician in this zone.

Zone 1: At least IPX4, Only lighting fixtures with an IP of

minimum IPX4 and a voltage level according to SELV is

allowed in this zone. We recommend that the lights are

installed by a qualified electrician in this zone.

Zone 2: At least IP44. If items are not low voltage, then they

need to be installed at a height of at least 1.6m.

Zone 3: This zone includes all the space which is not mentioned in the 3 other zones (0, 1 and 2). As long as the water can not spat

on the lighting or steam can not get fixated on the light, then an IP21 is ok.

Specific remarks:

If the bottom of the basin for bath or shower is higher than 15cm from the ground, then the heights need to be calculated from the

bottom of the basin.

If there is no basin then the height for zone 0 is 10cm.

In the Netherlands the height of 225cm for zones 1 and 2 is replaced by 260cm.

Symbol

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits

that the item can be used in the bathroom).

Legislation requires that all electrical and electronic equipment must be collected for reuse and

recycling. Electrical and electronic equipment marked with this symbol indicating separate

collection of such equipment must be returned to a municipal waste collection point.

Please respect the minimum distance from the bulb to inflammable objects.

Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to

the earth connection (marked with this symbol).

Class II: The item is double insulated and must not be connected to the earth wire.

Class III: The item is only suitable for lower voltage supply and must not be connected to the earth

wire.

If the protection glass is damaged or broken, it needs to be replaced immediately.

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Lucide 22954/01/31 Tube Lampu Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Lucide. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Lucide 22954/01/31 Tube Lampu Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Lucide Lampu
Lebih banyak panduan untuk Lampu

Pertanyaan umum tentang Lucide 22954/01/31 Tube Lampu

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Lucide 21521/01/30 Leanne Lampu

Panduan

Lucide 30472/30/02 Giada Lampu

Panduan

Lucide 77583/81/30 Pippa Lampu

Panduan

Lucide 78199/01/30 Reda Lampu

Panduan

Lucide 26958/05/30 Lennert Lampu

Panduan

Lucide 45179/03/30 Anaka Lampu

Panduan

Lucide 27100/02/31 Carlyn Lampu

Panduan

Lucide 26958/15/30 Lennert Lampu

Kategori terkait