Panduan Makita DCF102 Kipas Angin

Panduan

9

Indicating the remaining battery capacity (Fig. 4)

Only for battery cartridges with the indicator

Press the check button (17) on the battery cartridge to indicate the remaining battery capacity. The indicator lamps

(16) light up for few seconds.

Indicator lamps

Remaining capacity

Lighted Off Blinking

75 % to 100 %

50 % to 75 %

25 % to 50 %

0 % to 25 %

Charge the battery.

(For 18 V and 14.4 V batteries only)

The battery may have malfunctioned.

(For 18 V and 14.4 V batteries only)

NOTE:

• Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual

capacity.

Appliance / battery protection system

The appliance is equipped with the protection system. This system automatically cuts off power to the motor to

extend appliance and battery life. The appliance will automatically stop during operation if the appliance or battery is

placed under one of the following conditions.

- Overload protection : When the appliance is operated in a manner that causes it to draw an abnormally high

current, the appliance automatically stops without any indication. In this situation, turn the appliance off and stop

the application that caused the appliance to become overloaded. Then turn the appliance on to restart.

- Overheat protection : When the appliance is overheated, the appliance automatically stops. Let the appliance cool

down before turning it on again.

- Overdischarge protection : When the battery capacity becomes low, the appliance stops automatically. If the

appliance does not operate even when the switches are operated, remove the battery cartridge from the appliance

and charge it.

Starting / stopping the fan (Fig. 1, 2)

Push the power switch button (1) to turn on the fan. Push the power switch button again to turn off the fan.

Changing wind speed (Fig. 5)

Push the wind speed change button (2) while the fan is running. The wind speed increases every time you push the

button. The wind speed will return to the lowest speed when running in the highest speed.

The cordless fan will start in the same speed as the previous setting.

Adjusting fan head angle (Fig. 6, 7)

The angle of the fan head can be adjusted manually. The range of motion in the fan head is as shown in the gure.

For DCF102, press and hold the release button (8) when adjusting the fan head angle.

NOTE:

Do not turn the fan head further than its range of motion.

Oscillating the fan head (Fig. 8)

Push the oscillation button (4) to oscillate the fan head. Push the button again to stop the oscillation.

The fan head begin to oscillate from the current position when the oscillation button is pushed. The fan head oscillate

90-degree angle of range.

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Makita DCF102 Kipas Angin Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Makita. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Makita DCF102 Kipas Angin Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Makita Kipas Angin
Lebih banyak panduan untuk Kipas Angin

Pertanyaan umum tentang Makita DCF102 Kipas Angin

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Makita DCF203Z Kipas Angin

Panduan

Makita CF101D Kipas Angin

Panduan

Makita DCF102X1O Kipas Angin

Panduan

Rowenta VU5690F0 Turbo Silence Extreme Kipas Angin

Panduan

Trust 20653 Kipas Angin

Panduan

Rowenta QV2540F0 Turbo Swift Compact Kipas Angin

Panduan

Rowenta VU2750F0 Turbo Silence Extreme+ Kipas Angin

Panduan

Rowenta VU2730F0 Turbo Silence Extreme+ Kipas Angin

Kategori terkait