Panduan Makita DCJ206 Jaket

Panduan

7 ENGLISH

• Choose appropriate temperature settings in

accordance with the usage environment for

continuous use.

• The battery cartridge, battery holder and con-

nectors must not be allowed to get wet during

washing and drying.

• The appliance is not to be used by young chil-

dren unless the controls have been pre-set by

a parent or guardian, or unless the child has

been adequately instructed on how to operate

the controls safely.

• Be careful not to touch the same part of the

skin with the heating section for a long time. If

the heating section touches the same part of the

skin for a long time, there is a possibility of low

temperature burns even at a relatively low tem-

perature (40 to 60 °C).

• Stop using the jacket when you feel it is hot.

• Never use the jacket while you are sleeping.

• In order to avoid the possibility of heatstroke,

disconnect the clothing when moving to

an environment having signicantly higher

temperature.

• Check carefully on the marking

in the inter-

nal part of the cloth. Do not insert pins on the

cloth from external or internal parts.

• Remove the batteries from the jacket before

charging.

• Remove exhausted batteries from the jacket

and dispose of them safely.

• Before storing the jacket for a long period,

remove the batteries.

• Do not short-circuit the supply terminals.

Washing

• When washing the jacket, follow the instruc-

tions in the caution tag on the jacket.

• Before cleaning the jacket, remove the battery

holder and the battery cartridge and then place

the power cable in the battery pocket and

close the fastener.

Work area safety

• Keep work area clean and well lit. Cluttered or

dark areas increase accident risk.

Electrical safety

• Do not expose the jacket to rain or wet condi-

tions. Water entering the jacket may increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the jacket.

Keep cord away from heat, oil, sharp edges.

• Do not connect power source to USB port.

Otherwise there is risk of re. The USB port is only

intended for charging lower voltage device.

• Always place the cover onto the USB port

when not charging the lower voltage device.

• Do not insert a nail, wire, etc. into USB power

supply port. Otherwise a circuit short may cause

smoke and re.

• Do not handle the cord and battery with wet or

greasy hand.

• Never use the jacket when the cord or plug is

damaged.

• Always use the battery holder specied by

Makita.

• Do not leave any cord disconnected while the

battery power is supplied. Young children may

put the live plug in their mouth and cause injury.

• Do not connect the plug of the battery holder

to appliances other than the jacket specied

by Makita.

Personal safety

• Stay alert, watch what you are doing and use

common sense when using the jacket. Do not

use the jacket while you are tired or under the

inuence of drugs, alcohol or medication. A

moment of inattention while using the jacket may

result in serious personal injury.

Jacket use and care

• Do not use the jacket if the switch does not

turn it on and off. Any jacket that cannot be

controlled with the switch is dangerous and must

be repaired.

• Maintain the jacket. Check for breakage of

parts and any other condition that may affect

the jacket’s operation. If damaged, have the

jacket repaired before use.

• Use the jacket in accordance with these

instructions, taking into account the working

conditions and the work to be performed. Use

of the jacket for operations different from those

intended could result in a hazardous situation.

• If the fuse link has ruptured, return the jacket

to our authorized service center for repair.

Battery tool use and care

1. Recharge only with the charger specied by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of re

when used with another battery pack.

2. Use power tools only with specically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and re.

3. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a re.

4. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause

irritation or burns.

5. Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behaviour resulting in

re, explosion or risk of injury.

6. Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 130 °C may cause explosion.

7. Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instruc-

tions. Charging improperly or at temperatures

outside the specied range may damage the

battery and increase the risk of re.

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Makita DCJ206 Jaket Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Makita. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Makita DCJ206 Jaket Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Makita Jaket
Lebih banyak panduan untuk Jaket

Produk-produk terkait

Panduan

Makita CJ106D Jaket

Panduan

Makita DCV202 Jaket

Panduan

Makita CV102D Jaket

Panduan

Makita CJ105D Jaket

Panduan

Makita DCJ205 Jaket