Panduan Philips GC1990 Setrika

Panduan

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet from the

support that Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

A Spray nozzle (all types except GC1903/GC1910)

B Cap of lling opening

C Steam control

- O= no steam

- small cloud = minimum steam

- large cloud = maximum steam

- x = Calc-clean position

D Spray button 8 (all types except GC1903/GC1910)

E Steam boost button \ (all types except GC1903/GC1905/GC1910/GC1920)

F Automatic shut-off light (GC1990/GC1991 only)

G Temperature dial

H Double-Active Calc System (all types except GC1903/GC1905/GC1910/

GC1920)

I Temperature light

J Mains cord

K Type plate

L Water tank

M MAX water level indication

N Soleplate

O Heat-resistant storage cover (GC1981/1991 only)

Important

Read this user manual carefully before you use the appliance and save it for future

reference.

Danger

- Never immerse the iron in water.

Warning

- Check if the voltage indicated on the appliance corresponds to the local mains

voltage before you connect the appliance.

- Do not use the appliance if the plug, the mains cord or the appliance itself shows

visible damage, or if the appliance has been dropped or leaks.

- If the mains cord is damaged, you must have it replaced by Philips, a service

centre authorised by Philips or similarly qualied persons in order to avoid a

hazard.

- Never leave the appliance unattended when it is connected to the mains.

- This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- Do not let the mains cord come into contact with the hot soleplate of the iron.

Caution

- Only connect the appliance to an earthed wall socket.

- Check the mains cord regularly for possible damage.

- The soleplate of the iron can become extremely hot and may cause burns if

touched.

- When you have nished ironing, when you clean the appliance, when you ll or

empty the water tank and also when you leave the iron even for a short while:

set the steam control to position O, put the iron on its heel and remove the

mains plug from the wall socket.

- Always place and use the iron on a stable, level and horizontal surface.

- Do not put perfume, vinegar, starch, descaling agents, ironing aids or other

chemicals in the water tank.

- This appliance is intended for household use only.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards regarding electromagnetic elds

(EMF). If handled properly and according to the instructions in this user manual, the

appliance is safe to use based on scientic evidence available today.

Before first use

1 Remove any sticker or protective foil from the soleplate.

2 Let the iron heat up to maximum temperature and pass the iron over a piece

of damp cloth for several minutes to remove any residues from the soleplate.

Using the appliance

Filling the water tank

This iron is designed to be used with tap water.

If the tap water in your area is very hard, we advise you to mix it with an equal

amount of distilled water. Do not use distilled water only.

Do not put perfume, vinegar, starch, descaling agents, ironing aids, chemically

descaled water or other chemicals in the water tank.

1 Switch off the appliance and unplug it.

2 Set the steam control to position O (= no steam) (Fig. 2).

3 Openthecapofthellingopening(Fig.3).

4 Tilttheironandllthewatertankuptomaximumlevelunderthetap(Fig.4).

Note: Do not ll the water tank beyond the MAX indication.

5 Closethecapofthellingopening(‘click’).

Selecting temperature and steam setting

Fabric type Temperature

setting

Steam

setting

Steam boost

(specic

types only)

Spray

(specic

types only)

Linen MAX large

cloud

Yes \ Yes 8

Cotton 3 large

cloud

Yes \ Yes 8

Wool 2 small

cloud

No Yes 8

Silk 1 O No No

Synthetic fabrics

(e.g. Acrylic,

nylon, polyamide,

polyester).

1 O No No

Check the laundry care label of the article to be ironed to determine the required

ironing temperature.

If you do not know what kind or kinds of fabric an article is made of, determine the

right ironing temperature by ironing a part that is not visible when you wear or use

the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent

shiny patches. Avoid using the spray function to prevent stains.

1 To set the appropriate ironing temperature, turn the temperature dial to the

appropriate position (see the table above) (Fig. 5).

2 Put the iron on its heel.

3 Put the mains plug in an earthed wall socket.

, The temperature light goes on.

Do not set the steam control to a steam setting if you have set a low ironing

temperature (below 2/ WOOL setting) or when the iron is still heating up (as

long as the temperature light is on). Otherwise water will leak from the iron.

4 When the temperature light goes out, wait a while before you start ironing.

, During ironing, the temperature light goes on from time to time. This indicates

that the iron is heating up to the set temperature.

5 Set the appropriate steam setting. Make sure that the steam setting you select

is suitable for the set ironing temperature:

- O for no steam (for all temperature settings). (Fig. 2)

- small cloud for minimum steam (temperature settings 2 and 3. (Fig. 6)

- large cloud for maximum steam (temperature settings 3 to MAX. (Fig. 7)

Features

Spray function (specic types only)

You can use the spray function at any temperature to moisten the article to be

ironed. This helps remove stubborn creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be

ironed (Fig. 8).

Steam boost function (specic types only)

A powerful boost of steam helps to remove very stubborn creases.

The steam boost function only works at temperature settings between 3 and

MAX.

1 Press and release the steam boost button (Fig. 9).

Vertical shot of steam (specic types only)

You can also use the steam boost function when you hold the iron in vertical position.

This is useful for removing creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and release the steam boost

button (Fig. 10).

Never direct the steam at people.

Automatic shut-off function (specic types only)

The automatic shut-off function automatically switches off the iron if it has not been

moved for a while.

, Theautomaticshut-offlightashestoindicatethattheironhasbeenswitched

off by the automatic shut-off function (Fig. 11).

To let the iron heat up again:

1 Pick up the iron or move it slightly.

ENGLISH

2

4239.000.7223.2

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Philips GC1990 Setrika Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Philips. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Philips GC1990 Setrika Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Philips Setrika
Lebih banyak panduan untuk Setrika

Pertanyaan umum tentang Philips GC1990 Setrika

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Philips HI5914 Setrika

Panduan

Philips GC8616 PerfectCare Aqua Setrika

Panduan

Philips GC9520 PerfectCare Setrika

Panduan

Philips GC9222 Setrika

Panduan

Philips PSG7050 PerfectCare Setrika

Panduan

Philips GC9625 Setrika

Panduan

Philips DST7060 Setrika

Panduan

Philips GC6433 Setrika

Kategori terkait