Panduan Philips GC3360 Setrika

Panduan

Problem Possible cause Solution

The iron

is plugged

in, but the

soleplate

stays cold.

There is a

connection

problem.

Check the mains cord, the plug and

the wall socket.

The temperature

dial is set to MIN.

Set the temperature dial to the

required position

The iron

does not

produce any

steam.

There is not enough

water in the water

tank.

Fill the water tank (see chapter

‘Preparing for use’, section ‘Filling

the water tank).

The steam control

is set to position 0.

Set the steam control to a position

between 1 and 4 (see chapter

‘Using the appliance’, section ‘Steam

ironing’).

The iron is not hot

enough and/or the

drip-stop function

has been activated

(specic types only).

Set an ironing temperature that is

suitable for steam ironing ( 2 to

MAX). Put the iron on its heel and

wait until the amber temperature

light goes out before you start

ironing.

Water

droplets drip

onto the

fabric during

ironing.

The temperature

dial has been set to

a temperature that

is too low for steam

ironing.

Set an ironing temperature that

is suitable for steam ironing

(temperature settings 2 to MAX).

Put the iron on its heel and wait

until the amber temperature light

goes out.

You have put an

additive in the

water tank.

Rinse the water tank and do not

put any additive in the water tank.

You have not closed

the cap of the lling

opening properly.

Press the cap until you hear a click.

Flakes and

impurities

come out of

the soleplate

during

ironing.

Hard water forms

akes inside the

soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’, section ‘Calc-

Clean function’).

The

temperature

light ashes

red (specic

types only).

The automatic shut-

off function has

switched off the

iron (see chapter

‘Features’).

Move the iron slightly to deactivate

the automatic shut-off function.

The red auto-off indication of the

temperature light goes out.

Water drips

from the

soleplate

after the iron

has cooled

down or has

been stored

(specic

types only)

You have put the

iron in horizontal

position while there

was still water in the

water tank.

Always set the steam control to

position 0 and empty the water

tank after use. Store the iron on

its heel.

The iron

does not

produce a

steam boost.

You used the steam

boost function too

often within a short

period.

Continue ironing in horizontal

position and wait a while before

you use the steam boost function

again..

The iron is not hot

enough.

Set an ironing temperature at

which the steam boost function

can be used (temperature settings

2 to MAX). Put the iron on

its heel and wait until the amber

temperature light goes out before

you use the steam boost function.

4239.000.6595.4

4/11

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Philips GC3360 Setrika Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Philips. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Philips GC3360 Setrika Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Philips Setrika
Lebih banyak panduan untuk Setrika

Pertanyaan umum tentang Philips GC3360 Setrika

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Philips PSG6022 PerfectCare Setrika

Panduan

Philips GC9247 PerfectCare Setrika

Panduan

Philips GC9420 Setrika

Panduan

Philips GC9650 Setrika

Panduan

Philips GC9685 PerfectCare Elite Plus Setrika

Panduan

Philips PSG7050 PerfectCare Setrika

Panduan

Philips GC6742 Setrika

Panduan

Philips GC4444 Setrika

Kategori terkait