Panduan Philips GC5030 Azur Elite Setrika

Panduan

ENGLISH

11

Problem Possible cause Solution

You have an ironing board

cover that is not designed

to cope with the high steam

rate of the appliance.

Put an extra layer of felt material under

the ironing board cover to prevent

condensation on the ironing board.

You can buy felt in a fabric shop.

Water droplets

drips onto the

garment during

ironing.

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position and

wait a while before you use the steam boost

function again.

You have not closed the

water tank lid properly.

Press the lid until you hear a ‘click’.

You have not insert

the Quick Calc Release

collector properly back

to the appliance (specic

types only).

Stop ironing and let the iron cools down for at

least 1 hour. Take out the Quick Calc Release

collector. Insert it back into the appliance and

ensure the collector is in-line with the surface

of the appliance. Push down the lever (“click”).

If the Quick Calc release tray is damaged,

contact a consumer care center in your country

(see the world wide guarantee leaet for

contact details).

You have put a chemical

into the water tank.

Rinse the water tank and do not put any

perfume or chemicals into the water tank.

The iron does not

produce a steam

boost

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position and

wait a while before you use the steam boost

function again.

You are ironing before the

iron gets ready

Wait until the iron is ready (the light on the

display panel stops ashing).

Dirty water

and impurities

come out of the

soleplate during

ironing.

Hard water with impurities

or chemicals has formed

akes inside the soleplate.

Perform Quick Calc Release (specic types

only) or Calc-Clean (specic types only).

See chapter “Cleaning and maintenance”.

There is an amber

light ashing on

the handle of the

iron.

The Calc-Clean reminder

light is activated. This is

to remind you to perform

Calc-Clean.

Perform Quick Calc Release (specic types

only) or Calc-Clean (specic types only).

See chapter “Cleaning and maintenance”.

The iron leaves a

shine or an imprint

on the garment.

The surface to be ironed

was uneven, for instance

because you ironed over

a seam or a fold in the

garment.

The iron is safe to use on all ironable garments.

The shine or imprint is not permanent and

disappears when you wash the garment. Avoid

ironing over seams or folds. You can also place

a cotton cloth over the area to be ironed to

avoid imprints.

The iron makes a

lot of noise.

There is no water in the

appliance.

Fill the water in the water tank.

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Philips GC5030 Azur Elite Setrika Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Philips. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Philips GC5030 Azur Elite Setrika Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Philips Setrika
Lebih banyak panduan untuk Setrika

Pertanyaan umum tentang Philips GC5030 Azur Elite Setrika

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Philips PSG8200 PerfectCare Setrika

Panduan

Philips GC9237 Setrika

Panduan

Philips DST7041 Setrika

Panduan

Philips GC9420 Setrika

Panduan

Philips GC9622 Setrika

Panduan

Philips GC8721 Setrika

Panduan

Philips GC9642 Setrika

Panduan

Philips GC9230 PerfectCare Expert Setrika

Kategori terkait