Panduan Philips GC5036 Azur Elite Setrika

Panduan

ENGLISH

10

2 Make sure there is enough water (more than 3/4) in the water tank. If there is not

enough water, unplug the iron, ll the water to MAX indication (Fig.3-2) and plug in

the iron again (Fig.3-3).

Do not pour vinegar or other descaling agents into the water tank.

3 Wait for the iron to heat up. This takes about 2 minutes (Fig.3-3).

Note: the Calc-Clean reminder light turns o during heating up.

4 Unplug the iron when the ‘iron ready’ light stops breathing (Fig. 3-4).

5 Hold the iron over the sink. Keep pushing the Calc-Clean button and gently shake

the iron forth and back until all water in the water tank has been used up (Fig. 3-5).

Scales is ushed out, steam and boiling water also come out of the soleplate.

Note: Repeat steps 2 to 5 if the water that comes out of the appliance still contains

scale particles.

6 Plug in the appliance and let the appliance heat up to dry the soleplate. This takes

about 2 minutes (Fig.3-6).

7 Unplug the appliance. Move the appliance gently over a piece of cloth to remove any

water stains on the soleplate (Fig. 3-7).

Troubleshooting

This chapter summarises the most common problems you could encounter with the

appliance. If you

are unable to solve the problem with the information below, visit

www.philips.com/support for a list of frequently asked questions or contact the

Consumer Care Centre in your country.

Problem Possible cause Solution

The iron does

not produce any

steam.

There is not enough water

in the tank.

Fill the water tank.

The steam setting is set to

“steam o”

Tilt the iron up and press the steam button on

top of the handle to select a steam setting.

The iron is not ready. Wait until the iron is ready (the light on the

display panel stops ashing).

The steam setting

does not change

when I press the

steam button on

top of the handle.

The steam button changes

steam settings only

when the iron is tilted. In

horizontal position, the

steam button serves as

a trigger to release extra

steam in any setting.

Tilt the iron up slightly and press the steam

button to change steam setting.

This is designed to ensure the consumers do

not accidentally change the steam setting

while ironing.

The ironing board

cover becomes

wet or there are

water droplets on

the garment during

ironing.

Steam has condensed on

the ironing board cover

after a long ironing session.

Replace the ironing board cover if the foam

material has worn out. You can also add an

extra layer of felt material under the ironing

board cover to prevent condensation on the

ironing board. You can buy felt in a fabric shop.

Rating

Selengkapnya tentang panduan ini

Kami memahami bahwa menyenangkan memiliki panduan cetak Philips GC5036 Azur Elite Setrika Anda. Anda selalu dapat mengunduh panduan dari situs web kami dan mencetaknya sendiri. Jika Anda ingin memiliki panduan asli, kami sarankan Anda menghubungi Philips. Mereka mungkin dapat memberikan panduan asli. Apakah Anda mencari panduan untuk Philips GC5036 Azur Elite Setrika Anda dalam bahasa lain? Pilih bahasa pilihan Anda di beranda kami dan cari nomor model untuk melihat apakah kami menyediakannya.

Spesifikasi

Semua panduan untuk Philips Setrika
Lebih banyak panduan untuk Setrika

Pertanyaan umum tentang Philips GC5036 Azur Elite Setrika

Tim dukungan kami mencari informasi produk yang berguna dan jawaban atas pertanyaan umum. Jika Anda menemukan ketidakakuratan dalam pertanyaan umum kami, harap beri tahu kami melalui formulir kontak kami.

Produk-produk terkait

Panduan

Philips DST3020 Setrika

Panduan

Philips HI5919 Setrika

Panduan

Philips GC7041 PerfectCare Viva Setrika

Panduan

Philips GC2115 Setrika

Panduan

Philips GC9690 PerfectCare Elite Plus Setrika

Panduan

Philips GC8703 Setrika

Panduan

Philips GC9235 PerfectCare Setrika

Panduan

Philips PSG7050 PerfectCare Setrika

Kategori terkait